• 2000 Series Rotary Actuator

    Product Overview

    Like all 2G actuators, the 2000 Series rotary actuator family has fully integrated positioning feedback and motor control systems. The angular measurement system on the units never needs calibration or “homing” on power on.

    All 2G actuators are IP69K rated – providing total protection from water and dust ingress, and protection from steam-jet cleaning.

    There are two variants of 2000 rotary available: the High Speed model and the High Torque model. The High Speed unit is capable of a maximum rotational force of 10 ft. lbs. at a maximum rotational speed of 60 RPM at 24 V whereas the High Torque unit is capable of a maximum rotational force of 50 ft. lbs. at a maximum rotational speed of 9 RPM at 24 V.

    All units in this family have RS-232, RS-485, and analog control options as standard.

    2G Engineering is an AS9100 certified organization.

  • Testing & Verification

    Each unit sold undergoes a rigorous factory acceptance test before it leaves our facility. A copy of the test records are included with each unit.

    If a customer has specific requirements for testing please contact us and we will be happy to adapt our procedures to meet your requirements.

  • Product Configurations

    The 2000 Series rotary actuator units have a wide range of standard configuration options available, including:

    • Output speed and force
    • Output shaft length and style
    • Connector pinout
    • Connector type
    • Dual connector option for redundant power and data
    • Dual connector can also be used for pass through power and data
    • Units can be made from 316 stainless steel, 6061 aluminum, or grade 5 titanium. If you need a different material please contact us for a quote.

  • Product Applications

    The 2000 Series rotary actuator is well-suited to a variety of applications, including:

    • Valve actuation
    • Torque tools
    • Mobility systems
    • Control control surface actuation (wings / rudders)
    • Wenches / tensioner systems
Technical SpecificationsDownload Product Datasheet PDFRequest a
Product QuoteCompare Rotary ActuatorsAccess Product Manuals & Support
3

Material Compositions

The 2000 Series rotary actuator is available for ordering in aluminum, stainless steel or titanium construction, depending on project application and requirements.
50

Ft-lbs of Torque

Combine intelligence with the raw power of 50 ft-lbs maximum output force, which can be controlled via the software
management system.
IP69K

Rated

The 2000 Series meets the IP69K rating to provide total protection from water and dust ingress and steam-jet cleaning, as well as many other subsea conditions.
150+

Hours Tested

Our dedicated team of test engineers run the actuator through a rigorous series of tests to validate performance under simulated environmental conditions.

General Specifications

  • Absolute angle feedback and turn counting
  • Maximum rotational force 10 ft-lbs
    (High Speed model)
  • Maximum rotational speed 60 RPM at 24 V
    (High Speed model)
  • Maximum rotational force 50 ft-lbs
    (High Torque model)
  • Maximum rotational speed 9 RPM at 24 V
    (High Torque model)
  • Brushless DC motor
  • Oil-filled - self-contained - compensated

On-Board Motor Driver & Servo System

  • Configurable current limits, power, and speed
  • RS-232 & RS-485 serial interface
  • Optional Analog, Modbus, or CAN Bus
  • Contactless, non-wearing, absolute position angular encoder
  • Does not require homing
  • 0.1 degree resolution

Available Materials

  • Grade 5 - Titanium
  • 316 - Stainless steel
  • 6061 - Aluminum - Black

Operating Conditions

  • Voltage 12 <-> 32 V DC nominal
  • Operating depth greater than 10,000 ft
  • Operating temperature range: -20°C to 65°C
  • Storage temperature range: -30°C to 85°C

Current Draw at 24 V DC

  • Idle current = 0.03 A
  • Motor ON braking = 0.12 A
  • Max torque @ Stall = 5 A
  • 40 RPM at 4 ft-lbs = ~1.8 A
    (High Speed model)
  • 5 RPM at 5 ft-lbs = ~1 A
    (High Torque model)

Shaft Loads

  • Radial - 25 lbs max
  • Thrust - 10 lbs max

Download High Speed
Product Datasheet

Download High Torque
Product Datasheet

 
 

    Request a Quote

    First Name (required)

    Last Name (required)

    Email (required)

    Phone (required)

    Company (required)

    [honeypot material id:material]

    Message

     

    2G Engineering Rotary Actuators

    Subsea Rotary Actuator

    2000 Series
    • Max. Output Force 50 ft. lbs
    • Max. Speed 60 RPM
    • Operation Voltages 12, 24, 32 V DC
    • Weight in Air 5.0 lbs
    • Operation Depth >10,000 ft.
    • Storage Temp. -30°C to 85°C
    • Operation Temp. -30°C to 65°C
    View Actuator Details

    Subsea Rotary Actuator

    3500 Series
    • Max. Output Force 100 ft. lbs
    • Max. Speed 20 RPM
    • Operation Voltages 12 <-> 32 V DC
    • Weight in Air 37.0 lbs
    • Operation Depth >10,000 ft.
    • Storage Temp. -30°C to 85°C
    • Operation Temp. -30°C to 65°C
    View Actuator Details

    Subsea Rotary Actuator

    6000 Series
    • Max. Output Force 500+ lbs
    • Max. Speed 1000 RPM
    • Operation Voltages 12 <-> 400 V DC
    • Weight in Air Not Available
    • Operation Depth >10,000 ft.
    • Storage Temp. -30°C to 85°C
    • Operation Temp. -30°C to 65°C
    View Actuator Details